Rollover to Zoom
NOTE: Images may not be exact; please check specifications.
- APC
- 34286991
- AR3155W
-
Temporarily Out-of-Stock
- Call for next available delivery
Ordering Information
$1,917.64
Quick View
Getting Details
APC's NetShelter SX is a feature-rich rack enclosure optimized for easy installation, managing cables, integrating power distribution, and maximizing airflow.
-
341.00 lb(s)
-
Performance:
Rack Height: 45U
Maximum Mounting Depth: 36.02"
Minimum Mounting Depth: 10.31"
Front Door: 16.0 gauge
Vertical Posts: 16.0 gauge
Rear Door: 18.0 gauge
Roof: 18.0 gauge
Side Panels: 18.0 gauge
Rack Width: 19"
Weight Capacity (dynamic load): 2250.0 lbs
Weight Capacity (static load): 3000.0 lbs -
Rack, baying hardware, keyed-alike doors and side panels, leveling feet, mounting hardware, pre-installed casters, side panels, keys, user manual
-
Color: WhiteProduct Type: Rack
-
Optimized for high capacity cable management systems: NetShelter SX enclosures are optimized for use with high capacity cable management systems that attach to equipment mounting rails inside enclosures aligning with equipment mounting u-spaces and provide channels for routing and managing cabling.
Low-profile castors and adjustable leveling feet from underneath or above: Enclosures are shipped standard with both leveling feet and castors. Leveling feet can be quickly adjusted through the use of a screwdriver or drill, eliminating the need to reach underneath with a wrench.
Split rear doors: Split rear doors improve access and serviceability to rear of rack mounted equipment. The split rear doors help to maximize floor space. Only 11 inches (279 mm) of clearance is required behind the enclosures to allow for door swing.
Adjustable mounting rails with captive hardware and rapid alignment: The vertical mounting rails can be adjusted in 1/4 in (6.4 mm) increments covering virtually any mounting requirement for IT equipment. Easy alignment feature integrated into the enclosure mounting rail and side brace for quick alignment verification without the use of tools to verify alignment. U positions are numbered front and back for rapid installation of equipment.
Pre-installed full-enclosure height rear accessory channels: (2) Integrated and adjustable rear accessory channels provide zero U mounting locations for toolless accessories. Each channel has two mounting bays to support a combination of up to four accessories such as PDUs and vertical cable organizers. Channels are pre-installed at the factory in the rear of the enclosure but can be moved to other locations of the enclosure along the side brace to resituate cable management where it is needed most.
Integrated joining hardware with multiple width enclosure alignment: Enclosures include pre-installed joining hardware to join enclosures in a row and provide additional stability to the enclosure. The pre-installed joining hardware includes holes for joining to an adjacent enclosure at 600mm centers or 24in centers depending upon the floor layout.
Easily removable cable access roof: Roof can be removed with simple pull-pin hinges for access during equipment installation or even with cabling already in place and routed through the cable openings. Once removed the roof is reversible to reposition the larger cable openings for power distribution plugs and connectors.
Perforated front door with curved profile: Perforated front and rear doors provide ample ventilation for servers and networking equipment. Front door perforated area is optimized with a curved profile to provide greater surface area and allowance of more perforation coverage and higher perforation rating.
Quick release doors: Front door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple lift-off design.
Cable access openings with pre-installed brushes: Large cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor. Roof includes openings with brush strips pre-installed in locations biased towards the front of the enclosure to allow for data cable passthrough and provisions for air containment.
Integrated electrical grounding: The roof, side panels and front and rear doors are grounded to the frame of the enclosure. Eight additional electrical grounding inserts are located on the frame for external grounding. -
83.6"H x 29.5"W x 42.1D
-
This product is subject to our return policy. Please see our complete return policy for details.
-
Compliant Standards: IP20, REACH, RoHS, UL 2416, UL 60950-1
-
24102001
-
5 Years
-
5 Years
-
Standard warranty: 5 year repair or replace
| Description | placeholder | Availability | Unit Price | placeholder |
|---|---|---|---|---|
| View All Warranties | ||||