- Tripp Lite
- Call for next available delivery
Provide clean, reliable pure sine wave power for all your alternative energy needs with the Tripp Lite APSX1012SW. This inverter/charger supplies 1000 watts of continuous 230V AC power. Reliable large transformer design and frequency control powers resistive loads like refrigerators, motors, pumps, compressors and laser printers as well as electronic loads like TVs, computers, power tool and battery chargers. The 3-stage charging system will properly charge and maintain your vehicle's battery or separate battery bank. The charge rate is selectable so you can use a variety of battery sizes, as well as multiple batteries to fit your run time requirements.
Pure sine wave output
Continuous output inverter and high power battery charger
Quiet, high efficiency operation, high surge capacity and low idle current
Supply energy to various loads such as resistive load
Seamless transfer switching
Load sensing adjustable
Unlimited back up time with user supplied batteries
Multipurpose inverter/charger with seamless transfer switching - uses include conversion vans, fleet service vehicles, stand alone power source for off grid alternative energy with transfer times of 8-12 milliseconds.
LEDS ALARMS & SWITCHES
Alarms: Audible status indicators 10.5V (low battery)/21V start alarm
Switches: The inverter provides an RJ-45 port for optional APSRMSW remote control. RJ-45 port operates with standard RJ-485 interface (APSRMSW available separately).
Front panel LEDs: Set of front panel LED's provide inverter status, charger status and battery voltage status.
7.25" x 8.75" x 18"
Outlet quantity / type: Hardwire
Input connection type: DC INPUT Set of 2 DC bolt-down terminals. AC INPUT Hardwire via built in junction box with cover plate
Power Provided: 1000 watt(s)
Frequency compatibility: 50Hz
Continuous output capacity: 1000W
Peak output capacity: 2000W
Output nominal voltage: 230V
Output voltage regulation: Nominal 230v +/- 5% until LBW. Peak Voltage 360v
Output frequency regulation: 50/60Hz (+/- 0.5Hz)
Overload protection: Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads
Nominal Input Voltage Supported: 230VAC
Recommended Electrical Service: DC INPUT Requires 12VDC input source capable of delivering 240A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
Maximum input amps / watts: DC INPUT Full continuous load - 240A at 12VDC. AC INPUT 17 amps at 230VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
Voltage compatibility: 230VAC
Voltage compatibility: 12VDC
Expandable battery runtime: Runtime is expandable with any number of user supplied wet or gel type batteries.
DC system voltage: 12VDC
Battery charge: Includes 4/40 amp DC charging system adjustable.