- Ships in 24 Hours
- Connect your Thunderbolt 3 device to a 10GbE network via a PCIe expansion chassis
- Thunderbolt 3 to fiber network adapter
- Thunderbolt 3 PCIe expansion chassis
- Thunderbolt 3 PCIe enclosure
This Thunderbolt 3 to fiber network adapter connects your Thunderbolt 3 enabled device to a 10GbE network. The adapter combines the Thunderbolt 3 technology of TB31PCIEX16 with the 10GbE dual-fiber connection of PEX20000SFPI (Intel 82599 chipset). The assembled adapter features one DisplayPort output, one additional Thunderbolt 3 port, and two open 10GbE SFP+ slots.
Chassis, thunderbolt 3 cable, (4) rubber feet, PCIE 10GBase fiber card, universal power adapter, low-profile bracket, documentation
Bandwidth: 3.94 GB/s (x4 PCIe 3.0 )
Compatible Networks: 10 Gbps
Full Duplex Support: Yes
Jumbo Frame Support: 15K max.
Maximum Data Transfer Rate:
Chassis: 40 Gbps (Thunderbolt 3)
PCIe Card: 20 Gbps - Full-Duplex
Promiscuous Mode: Yes
IEEE 802.3ad (Link Aggregation)
IEEE 802.3x (2005 Flow Control Support)
IEEE 802.1Q (VLAN tagging)
Type and Rate: Thunderbolt 3 - 40 Gbit/s
The expansion chassis does not support video cards.
This expansion chassis does not provide full power delivery but will provide 15W of power, resulting in a slow charge to some laptops, such as MacBook Pro. When the dock is connected to your host laptop, a charging icon may appear on your laptop's screen. This is only sufficient enough to charge your laptop in sleep state, and charging will require an extended time period.
5K support can only be achieved using a Thunderbolt 3 5K monitor. DisplayPort 5K monitors will not work with this expansion chassis.
A 4K-capable display is required to achieve 4K x 2K resolution (4K is also known as 4K x 2K).
Certain monitors may be limited to 4K at 30Hz when connecting through DisplayPort. These monitors include the following models: Dell P2715Q, Viewsonic VX2475Smhl-4K, Philips 288P6LJEB, LG 31MU97C-B, Asus PB287Q (these models will need to be set to 4K at 30Hz).
When connecting a display to one of the Thunderbolt 3 USB-C ports, a USB-C video adapter might be required depending on the input of your display.
Secondary Thunderbolt 3 port can also be used to connect USB 3.1 (10Gbps) USB-Type C devices, such as USB 3.1 Hubs. Backwards compatible with USB 3.0 (USB 3.1 Gen 1), and USB 2.0.
There is no operating system pre-installed.
Windows 7, 8, 8.1, 10
Windows Server 2008 R2, 2012, 2012 R2, 2016
Linux 2.6.24 to 4.11.x LTS Versions only
Data Transfer Rate: 10 Gbps
3.2"h x 5.6"w x 11.0"d
(1) PCI Express x8 Male
(2) Thunderbolt 3 USB-C (24-pin) Female
(1) DisplayPort (20 pin) Female
(1) PCI Express x16 Female
(2) SFP+ Slot Female
Center Tip Polarity: Positive
Input Current: 2A
Input Voltage: 100 ~ 240 AC
Output Current: 5.417A
Output Voltage: 12 DC
Plug Type: N
Power Consumption (In Watts): 65
Networking Protocol: 10 Gigabit Ethernet
Thunderbolt 3 equipped computer with a Thunderbolt 3 port.