Partial Quantity Available
- Call for next available delivery
- Add two Next Generation Form Factor M.2 SSDs and two SATA ports through PCI Express
- Ideal for data recovery, and improving the performance and capacity of your desktop PC
- M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports
This M.2 SSD RAID controller card lets you install two M.2 NGFF (Next Generation Form Factor) drives in your desktop computer. The card also features two SATA III (6Gbps) ports and supports hardware RAID. Now, you can merge the speed and compact size of M.2 solid state drives (SSD) with the storage capacity of traditional hard disk drives (HDD).
Leverage the size and speed of M.2 drives:
This M.2 controller card lets you take advantage of the size and performance benefits of NGFF SSDs. M.2 drives are smaller than typical platter drives or mSATA-based SSDs, so you can install them in small form-factor PCs and servers, or in tighter areas within your computer case.
When you couple the card with an M.2 drive, you can give your computer’s performance a noticeable speed boost. By installing your operating system on the M.2 drive, you'll have faster access to the files you commonly use, and you can continue to use your higher-capacity platter HDD for bulk storage.
Peace of mind, with simple and cost-effective data recovery:
Due to their performance and size advantages, M.2 drives are commonly used in laptops. If your laptop has failed but its M.2 drive is functional, then this card can help with data recovery. Once the M.2 drive is installed and the data recovery is complete, you can continue to use the drive for storage and backup purposes.
Build a high-performance RAID array:
If you need a scalable, internal storage solution that you can count on, then this card can help. It supports a range of RAID configurations (RAID 0, 1, and 10), giving you multiple ways to expand your storage, improve your computer’s performance, or to create data redundancy backups.
Connect even more drives with port multiplication:
Because the M.2 card supports port multiplication, you can connect up to four drives to one of the card’s SATA ports. With a built-in port multiplier, you can install up to seven drives (two M.2 SSDs, five SATA drives) in your computer through this single drive controller.
Supports a wide range of drives:
You can rest assured that your M.2 SATA drives are compatible with the card. It supports the most common drive sizes, including 22110, 2280, 2260, 2242 and 2230. For more versatility, the card also supports hybrid drives.
Connector: Serial ATA 7-pinConnector Type: SATASlot Type: PCI-Express
controller, low-profile bracket, (2) M.2 mounting screws, documentation
Adapter Type: RAID
Data Transfer Rate: 600 Mbps
0.8"h x 4.7"w x 7.1"d
(2) M.2 Receptacle
(2) 7-pin SATA
(1) 4-pin SP4
This product is subject to our return policy. Please see our complete return policy for details.
Compliant Standards: CE, FCC, RoHS
Windows 10 (32-bit or 64-bit), 8 / 8.1 (32-bit or 64-bit), 7 (32-bit or 64-bit)
Windows Server 2012, 2008 R2
Mac OS 10.8 and later (tested up to 10.11)
PCI Express x4 slot (backward compatible with x8, and x16 slots)