Server Technology Switched Fail-safe Transfer Switch CDU, 2U, (16) NEMA 5-20R Outlets

  • Server Technology
  • 16158988
  • CW-16HF1B452
  • Temporarily Out-of-Stock
  • Call for next available delivery
Ordering Information
$1,691.80
The Sentry CW-16HF1 Fail-Safe provides fail-over redundancy to single or dual-power supply servers and network devices. Exclusive to the Sentry Switched Fail-Safe is its ability to carry loads on the A circuit, B circuit or both and to remotely manage the outlets. Similar, but unlike a common automatic transfer switch, the Sentry Switched Fail-Safe unit is unique in that it contains two in-feeds and two banks of eight outlets each, for a total of 16 outlets across the two circuits.

The "A" in-feed routinely powers just the A1-8 outlets, and the "B" in-feed routinely powers just the B1-8 outlets. However, if the "A" in-feed goes down, the "B" in-feed powers all 16 outlets and the same if the "B" in-feed goes down, the "A" infeed powers all the outlets. This "fail-safe" method has several advantages compared to a standard ATS because it does not prohibit load balancing between the two supplied circuits. A standard ATS contains two-in-feeds, but runs all outlets from just one source, with the secondary source only being used once an outage occurs on the capacity. This results in less heat, less resistance, and consequently less of a voltage drop compared to the same load existing on just one source. Only when an outage occurs on one of the two sources will the entire load be applied to a single source.