- Call for next available delivery
- Provides 100000VA, 100000watt(s), 208V power
- Surge Suppression is Standard
- Connector(s): Power Hard Wire 5-wire (3PH + N + G)
- 1 Outlets
- 5.4 minute(s) Battery Runtime at Full Load
- Attributes include Double conversion online
The APC Symmetra PX 100kW Scalable to 100kW, 208V with Startup is a modular, high-efficiency 3-phase UPS that is scalable up to 100kW. Suitable for use in small to medium data centers and high density zones.
Swappable batteries - Allows quick addition of runtime capacity or replacement of existing battery modules. Installed modules are automatically recognized by the system.
Battery replacement without tools - Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Advanced electrical features - Excellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high power efficiencyAdjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points - Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery modules connected in parallel - Delivers higher availability through redundant batteries.
Manageable external batteries - Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
Battery failure notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
Intelligent battery management - Maximizes battery performance, life and reliability through intelligent, precision charging.
CE Mark, CSA C22.2 No.107.3-05, EN/IEC 62040-3, ENERGY STAR (USA), Eurobat General Purpose, FCC Part 15 Class A, ISO 14001, ISO 9001, UL 1778
# Ports: 1Communication Interface: Ethernet, Serial (RS-232)Connector: Power Hard Wire 5-wire (3PH + N + G)
UPS, network management card, start-up service, documentation
Attributes: Double conversion onlineColor: BlackForm Factor: Tower
79.2"h x 47.25"w x 42.1"d
(1) Hard Wire 5-wire (3PH + N + G)
Communications & Management
Interface Ports: DB-9 RS-232, SmartSlot
Available SmartSlot Interface Quantity: (2)
Pre-Installed SmartSlot Cards: AP9517MPHW03
Control panel: Multi-function LCD status and control console.
Audible Alarm: Alarm when on battery, distinctive low battery alarm, configurable delays.
Battery Run Time (max): 5.4 minute(s)Power Provided: 100000 VA, 100000 watt(s), 208 VSurge Suppression: Standard
Output Power Capacity: 100kW/100kVA
Max Configurable Power: 100kW/100kVA
Nominal Output Voltage: 120V, 208V, 208V 3-phase
Output Voltage Distortion: Less than 2%
Output Frequency (sync to mains): 57-63Hz for 60Hz nominal
Topology: Double Conversion Online
Waveform Type: Sine wave
Output Voltage Tolerance: +/-1% static and +/- 5% at 100% load step
Output Voltage THD: < 2% for 0 to 100% linear load and < 6% for full non linear load
Bypass: Built-in Static Bypass
Nominal Input Voltage: 208V 3-phase
Input Frequency: 40-70Hz
Input voltage range for main operations: 177-239V (208V)
Maximum Input Current: 332A
Input Total Harmonic Distortion: Less than 5% for full load
Batteries & Runtime
Battery Type: VRLA
Included Battery Modules: (9)
Typical recharge time: 2 hours
Nominal Battery Voltage: +/-192V (split battery referenced to neutral)
End of Discharge Battery Voltage: +/-154V
Maximum Available Short Circuit Current: 30kA
Efficiency in Battery Operation: 94.70%
End of Discharge Maximum Battery Current: 351A
On Battery runtime, full load: 5.4 minutes (100kW)
On Battery runtime, half load: 15.7 minutes (50kW)
1 year on-site repair or replace with factory authorized Start-Up.