- Ships in 24 Hours
- Provides 3000VA, 2700watt(s), 120V power
- Surge Suppression is Standard
- Connector(s): Proprietary, USB, Power NEMA L5-30 (M), Power NEMA 5-15 (F), Power NEMA 5-20 (F)
- 12 Outlets
- 5.10 minute(s) Battery Runtime at Full Load
The APC Smart-UPS with SmartConnect offers intelligent and efficient network power protection from entry level to scaleable runtime. This UPS is ideal for servers, point-of-sale, routers, switches, hubs and other network devices.
# Ports: 12Communication Interface: USBConnector: Power NEMA 5-15 (F), Power NEMA 5-20 (F), Power NEMA L5-30 (M), Proprietary, USB
UPS, Smart-UPS signalling RS-232 cable, USB cable, CD with software, documentation CD
Color: BlackForm Factor: Tower
Adjustable voltage sensitivity:
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points:
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Provides notification of changing utility power and UPS power conditions
Automatic restart of loads after UPS shutdown:
Automatically starts up the connected equipment upon the return of utility power.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification:
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Boost and Trim Automatic Voltage Regulation (AVR):
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
Disconnected battery notification:
Warns when a battery is not available to provide backup power.
Provides actual kilowatt hours of usage for energy conscious users.
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent battery management:
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Intuitive LCD interface:
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Provide easy-to-read status of the unit and utility power conditions.
Provides proactive notifications of changing power or unit conditions and provides the user the ability to remotely control PMU functions.
Outlet group control:
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
Predicitive failure notification:
Provides early-warning fault analysis ensuring proactive component replacement.
Predictive replace battery date:
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Pure sine wave output on battery:
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Sequenced network shutdown and reboot:
Customize network shutdown and reboot sequence of connected servers and UPSs.
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Sine wave output:
Eliminates humming and heat generated when powering tubelights and fans.
Single switched outlet group:
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
StruxureWare Data Center Expert compatible:
Enables centralized management via StruxureWare Data Center Expert.
Temperature-compensated battery charging:
Prolongs battery life by regulating the charge voltage according to battery temperature.
Provides management of the UPS via a USB port (not available on all models).
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
17"H x 7.7"W x 21.42"D
Battery Run Time (max): 5.10 minute(s)Power Provided: 120 V, 2700 watt(s), 3000 VASurge Suppression: Standard
Output power capacity: 2.7 KWatts / 2.88 kVA
Max Configurable Power (Watts): 2.7 KWatts / 2.88 kVA
Nominal Output Voltage: 120V
Output Voltage Distortion: Less than 5%
Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
Other Output Voltages: 110, 127
Topology: Line Interactive
Waveform type: Sine wave
Output Connections: (2) NEMA 5-20R (Battery Backup); (6) NEMA 5-15R (Battery Backup)
Transfer Time: 6ms typical : 10ms maximum
Nominal Input Voltage: 120V
Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections: NEMA L5-30P
Cord Length: 6ft ( 1.83meters )
Input voltage range for main operations: 82 - 144V
Input voltage adjustable range for mains operation: 75 - 154V
Number of Power Cords: 1
Other Input Voltages: 110, 127
Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 3 hour(s)
Replacement Battery: RBC55
Expected Battery Life (years): 3 - 5
RBC Quantity: 1
Interface Port(s): SmartSlot , USB
Control panel: Multi-function LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO): Yes
Available SmartSlot Interface Quantity: 1
Surge energy rating: 530Joules
Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Operating Temperature: 32 - 104 F ( 0 - 40 C )
Operating Relative Humidity: 0 - 95 %
Operating Elevation: 0-10000ft ( 0-3000meters )
Storage Temperature: -15 - 45 C
Storage Relative Humidity: 0 - 95 %
Storage Elevation: 0-50000ft ( 0-15000meters )
Audible noise at 1 meter from surface of unit: 45.0dBA
Online thermal dissipation: 275.0BTU/hr
This product is subject to our return policy. Please see our complete complete return policy for details.
Compliant Standards: CSA, Energy Star, FCC Part 15 A, UL 1778
3-years repair or replace (excluding battery) and 2-years for battery