Black Box InvisaPC KVM over IP Extender Kit, Dual Head DVI-D, USB HID, USB 2.0

NOTE: Images may not be exact; please check specifications.
  • Black Box
  • 35823488
  • DTX1002
  • Temporarily Out-of-Stock
  • Call for next available delivery
Ordering Information
With the InvisaPC solution, computers are removed from the desktop and are relocated within a secure, climate-controlled equipment room, and connected to an InvisaPC transmitter. Each user has his/her own keyboard, monitor, mouse, and peripheral setup connected to an InvisaPC receiver. The receiver delivers a high performance, real-time user experience, just as if the user was sitting right in front of a physical computer with direct input. The clients and the back-racked servers are connected via standard LAN or WAN infrastructure. The bandwidth requirements of the system are very low. For example, with the InvisaPC Dual-Head, transmitting two 1080p video sources only requires 80 Mbps bandwidth and, it can use as low as a few Kbps when idle. The low bandwidth requirements enable extension over the Internet with very low latency and sharing over corporate networks.

The InvisaPC bridges the gap between IP-based KVM extension and switching applications and access to virtual machines. Use an InvisaPC Dual-Head receiver as a direct portal to dual-head virtual machines, especially Microsoft RDP 7.1 and RDP 8, to redirect digital video, USB keyboard and mouse, audio and vUSB to distant users over IP. The InvisaPC requires a host server with an operating system and associated Client Access Licenses (CALs). However, the InvisaPC doesn't require any drivers or software to be installed on computers. This hardware-based solution is plug-and-play, directly connecting to the network interface right out of the box.

Connected to a virtual machine, one InvisaPC receiver can support up to 32 RDP, RDP 7.1/8 targets. The same receiver can also be connected with up to a total of 32 InvisaPC transmitters/servers. That way each InvisaPC receiver supports switching between a total of 32 soft and hard targets. The setting can be copied from one receiver to another to simplify setup and user profiles may be configured on the receiver to restrict targets. Multiple receivers may be used to create a matrix switch via the network, too, without any management requirements, although management is supported.