Huge Savings on Top Tech Products


          Tripp Lite PowerVerter APS X Series 4000W Inverter Charger w Auto-Transfer Switching, Hardwire Input Output

          Tripp Lite PowerVerter APS X Series 4000W Inverter Charger w Auto-Transfer Switching, Hardwire Input Output
          More From: Tripp Lite
          Item #: 21815137
          Mfr. Part#: APSX4048SW
          Availability: Temporarily Out-of-Stock
          Est. Ship: Call for next available delivery

          • Warranty:

          Ordering Information

          Tripp Lite’s APSX4048SW DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 4000 watts of continuous 220, 230 or 240V selectable AC input & output from any 48V DC battery or automotive DC source; 50/60Hz pure sine wave output (hardwired). When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 1/70 amp charging system. In UPS mode, the APS system responds to blackouts and severe voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, and sine wave AC output in inverter and UPS backup modes. Built-in Automatic Voltage Regulation (AVR) corrects line power AC brownouts and overvoltages without using battery power during battery charging and UPS standby modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Optional APSRMSW wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information (part# APSRMSW sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages.
          Collapse & Return to Top
          Actual Weight 49.00 lb(s)
          Compatibility Notes Features

          220,230 or 240V selectable AC input & output from any 48VDC battery or automotive DC source
          4000W continuous pure sine wave AC output in inverter mode
          Double Boost output supports momentary start-up loads up to 200% of the continuous rating for up to 10 seconds (see specification chart) - OverPower output supports longer duration overloads to 150% for up to 60 seconds
          3-stage, selectable 1/70 amp battery charger with adjustable settings for wet/gel battery types
          LCD display and 4 membrane selector buttons allow user to configure operation
          Automatic overload and thermal (overheating) shutoff
          Front panel remote control connector enables remote off/on switching (APSRMSW sold separately)
          Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
          Remote battery temperature sensing connection function prolongs battery life by adjusting the charge float voltage level based on battery temperature


          Front Panel LEDs: LCD offers continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported).
          Switches: (5) memebrane switches allow user to operate and configure unit operation.


          Remote Control Capability: Yes
          TVSS Grounding: Main grounding lug connects inverter/charger to earth or vehicle chassis ground
          Contents Unit, documentation
          Physical Dimensions 9"h x 7.25"w x 22.5"d
          Ports/Connectors Output Receptacles: (1) Hardwire
          Input Connection Type: DC INPUT Set of DC bolt-down terminals. AC INPUT Hardwire via built in terminal strip with cover plate
          Power Provided 4000 watt(s)
          Power Notes OUTPUT

          Frequency Compatibility: 50/60Hz
          Output: 4000W
          Continuous Output Capacity: 4000W
          Peak Output Capacity: 6000W
          Output Nominal Voltage: 220/230/240V
          Output Voltage Regulation: LINE POWER (AC) Maintains nominal sine wave output from line power source; INVERTER POWER (AC) Maintains sine wave output of +/-2%
          Output Frequency Regulation: 50/60Hz (+/- 0.5Hz)
          Pure Sine Wave Output: Yes


          Nominal Input Voltages Supported: 220VAC; 230VAC; 240VAC
          Recommended Electrical Service: DC INPUT Requires 48VDC input source capable of delivering 120A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire
          Maximum Input Current: 120A
          Voltage Compatibility: 220; 230; 240VAC
          Voltage Compatibility: 48VDC


          Expandable Battery Runtime: Runtime is expandable with any number of user supplied wet or gel type batteries
          DC System Voltage: 48VDC
          Battery Pack Accessory (Optional): 98-121 sealed lead acid battery (optional)
          Battery Charge: Selectable 1/70 amp


          Voltage Regulation Description: Includes automatic voltage regulation to correct brownouts and overvoltages back to usable levels
          Overvoltage Correction: Overvoltages are automatically reduced by 10%
          Brownout Correction: Brownouts are automatically boosted by 10% and 20%


          Transfer Time (Line Power to Battery Mode): 20 millisecond (full cycle) / 10 millisecond (half-cycle)
          Low Voltage Transfer to Battery Power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops 10 to 80V AC (user adjustable).
          High Voltage Transfer to Battery Power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases 10 to 40V AC (user adjustable).
          Returns Policy This product is subject to our return policy. Please see our complete return policy for details.
          UNSPSC 39121006
          Warranty - Labor 2 Years
          Warranty - Parts 2 Years
          Collapse & Return to Top

          Our Accessibility Policy

          We endeavor to make our website accessible to any and all users. Please contact us toll-free at 800-998-4388 if you need assistance with navigating our blog, website, or placing an order. We appreciate your business and are happy to answer any questions that you may have.