Huge Savings on Top Tech Products


          Tripp Lite PowerVerter 2000W Utility Work Truck Inverter Charger w (2) Outlets

          More From: Tripp Lite
          Item #: 18419264
          Mfr. Part#: UT2012UL
          Availability: Temporarily Out-of-Stock
          Est. Ship: Call for next available delivery

            Ordering Information

            The UT2012UL Utility Work Truck Inverter/Charger is the quiet alternative to gas generators with no fumes, fuel or noise. It provides equipment with utility or generator supplied AC electricity filtered through premium ISOBAR surge protection. This DC-to-AC inverter with automatic line to battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged work site applications. Supplies up to 2000W of continuous 120VAC power from any 12VDC battery or automotive DC source. OverPower output feature temporarily provides up to 150% of the continuous output for 1-60 minutes, and DoubleBoost output feature delivers up to 200% of continuous output for up to 10 seconds, providing the extra power needed to start heavy-duty tools and motorized equipment.

            When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3-stage selectable 15/60Amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery derived AC output. A set of high current DC input terminals is included for simple installation (user supplies batteries and cabling). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design (tested to UL (USA) and (CSA) Canada standards) with frequency control, powers resistive electronic loads or large inductive motors, compressors and other devices with high current needs on start-up. Included is the APSRM4 wired remote power switch with full status LED's, which provides remote power inverter on/off switching and continuous status information. The UT2012UL supports an unlimited amount of runtime with user-supplied batteries.
            Collapse & Return to Top
            Actual Weight 40.60 lb(s)
            Compatibility Notes Key Features

            16.6 millisecond automatic transfer between line and battery power supports UPS protection for equipment compatible with a one cycle transfer time
            2000W continuous AC output in inverter mode, 4000W continuous AC output in AC mode
            DoubleBoost output supports momentary startup loads of up to 200% of the continuous rating for up to 10 seconds - OverPower output supports duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions
            3-stage selectable 15/60 Amp battery charger with adjustable settings for wet/gel/AGM battery types
            (2) NEMA 5-15R GFCI protected outlets pass 120V line power or inverter output through to connected equipment
            3-position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE ONLY to maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings
            Set of (6) front panel LED's display continuous status
            Set of (4) dip switches support wet/gel/AGM battery charging profiles, adjustable 135/145V high voltages and selectable 75/85/95/105VAC low voltage auto transfer during brownouts
            Set of (4) additional dip switches support (4) levels of charger limiting relative to output load size, a battery equalization program and battery charger low/high settings
            Resettable 25A charger AC input breaker and settable 20A AC output breaker and automatic 2-speed cooling fan
            Automatic overload and thermal (overheating) shutoff
            Front panel remote control connector enables remote off/on switching with included APSRM4 remote
            Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
            Includes a battery temperature sensor with 20-foot cable to prolong battery life by adjusting the charge level based on battery temperature



            3-position on/off remote switch enables simple on/off power control plus "auto/remote" Setting that enables distant on/off control of the inverter system when used in conjunction with APSRM remote (included) when used in inverter mode.

            Front Panel LEDs

            Set of (6) LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported)
            Contents Unit, remote control, temperature sensor cable, documentation
            Color Gray
            Physical Dimensions 7.25"h x 8.5"w x 16.25"d
            Ports/Connectors Outlet Quantity/Type: (2) NEMA 5-15R
            Outlet Details: (2) NEMA 5-15R GFCI protected outlets
            Input Connection Type: DC INPUT set of two (2) DC bolt-down terminals; AC INPUT NEMA 5-15R GFCI input plug
            Input Cord Length Details: DC INPUT User supplies cabling, 6AWG or larger (see manual); AC INPUT attached 6ft AC line cord with plug
            Power Provided 2000 watt(s)
            Surge Suppression Standard
            Power Notes OUTPUT

            Frequency Compatibility: 60Hz
            Output: 2000 Watts
            Continuous Output Capacity: 2000 Watts
            Output Nominal Voltage: 120V
            Output Voltage Regulation: LINE POWER (AC) Maintains 120V nominal sine wave output from line Source; Inverter Power (AC) Maintains PWM sine wave output voltage of 120VAC (+/- 5%)
            Output Frequency Regulation: 60Hz (+/- 0.3Hz)
            Overload Protection: Includes 25A input breaker dedicated to the charging system and 20A output breaker for AC output loads

            NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 400A should be positioned no more than 18" from the UT2012UL's battery in the positive line.


            Nominal Input Voltage Supported: 120VAC
            Recommended Electrical Service: DC INPUT requires 12VDC input source capable of delivering 192A for the required Duration (when used at full continuous capacity- DC requirements increase during Over-Power and Double-Boost operation); AC INPUT 15A 120VAC recommended.
            Voltage Compatibility: 120VAC
            Voltage Compatibility: 12VDC


            Expandable Battery Runtime: Runtime is expandable with any number of user supplied wet or gel or AGM type batteries
            DC System Voltage: 12VDC
            Battery Pack Accessory: 98-121 sealed lead acid battery (available separately)
            Battery Charge: 15A/60A (selectable)


            AC Suppression Rating: 600 Joules
            Returns Policy This product is subject to our return policy. Please see our complete return policy for details.
            Compliant Standards CSA, UL
            UNSPSC 39121006
            Warranty - Labor Call for Warranty
            Warranty - Parts Call for Warranty
            Warranty Details Product Warranty Period (U.S. & Canada): 30-month limited warranty
            Collapse & Return to Top
            Description Availability Unit Price  
            View All Warranties
            Collapse & Return to Top

            Our Accessibility Policy

            We endeavor to make our website accessible to any and all users. Please contact us toll-free at 800-998-4388 if you need assistance with navigating our blog, website, or placing an order. We appreciate your business and are happy to answer any questions that you may have.