Messages

          Omnitron miConverter GX T Gb Fiber Media Converter

          Item #: 18393797
          Mfr. Part#: 1223-1-2Z
          Availability: Temporarily Out-of-Stock
          Est. Ship: Call for next available delivery

          • Miniature Gigabit Ethernet media converter
          • Supports 1000BASE-T, 1000BASE-X and the IEEE 802.3 specification
          • Plug-and-Play capability
          • Ethernet 1000Base-T, Ethernet 100Base-TX, Ethernet 10Base-T, Ethernet 1000Base-X Cabling
          • Supports Ethernet, Fast Ethernet Gigabit Ethernet Networking
          • Data Transfer Speeds up to 1Gbps

          Ordering Information

          Price:
          $365.04
           
          The miConverter GX/T is a miniature 10/100/1000BASE-T UTP copper to 1000BASE-X fiber media converter that supports jumbo frames up to 10,240 bytes. The miConverter GX/T provides cost-effective fiber connectivity from Ethernet switches to diagnostic equipment, desktop and laptop computers.

          The GX/T features Small Form Pluggable (SFP) transceivers that support 1000BASE-X for interoperability with Gigabit fiber equipment. SFP transceivers enable adaptability to different fiber types, speed and distances, and support Coarse Wave Division Multiplexing (CWDM) technology to increase the bandwidth capacity of fiber infrastructure.

          The GX/T also supports SC and ST fixed fiber connectors for multimode, single-mode fiber; and single mode single-fiber models are available.

          The Plug-and-Play capability of the miConverter GX/T simplifies fiber-to-the-laptop and fiber-to-the-desktop deployments. Both the fiber port and the UTP port support auto-negotiation, an IEEE standard which defines how all the communicating devices automatically perform their configuration functions. Auto-negotiation achieves the best possible mode of operation (speed, duplex mode and pause mode) between the devices.

          The auto-negotiation feature can be disabled on both ports (for manual configuration) using DIP-switches on the module. This is useful in a situation where the GX/T is connected to a non-negotiating device and the configuration parameters must be set manually.

          Network flow control is managed by the pause function (configured via auto-negotiation or manually) that prevents network congestion on both the UTP and fiber ports. When pause is enabled and the device is experiencing network congestion, it will send out a Pause signal to its link partner, instructing it to slow down data transmission.

          The GX/T generates a remote fault indication when it detects link fault conditions and reports detection of these signals by displaying status on the LED. Through user DIP-switch configuration, the detection of these indicators or link modes can also be propagated to the other port on the GX/T as a means of notifying connected end-devices of the link fault.

          Diagnostic data is provided through LED indicators that assist in network installation and maintenance. The LEDs report the availability of power, port activity and link status and speed.

          The miConverter GX/T combines Gigabit Ethernet connectivity with the lightweight design and low-power consumption required for both permanent deployment and mobile service networks.
          Collapse & Return to Top
          Actual Weight 4.00 oz
          Connectivity
          Cabling Type Ethernet 1000Base-T, Ethernet 1000Base-X, Ethernet 100Base-TX, Ethernet 10Base-T
          Contents Transceiver, documentation
          General Information Optical Wave Length: 1310 nm
          Max Transfer Distance: 7.5 miles
          Status Indicators: Link activity, port transmission speed, power
          Features: CWDM, auto-negotiation, wall mountable, Jumbo Frames support, built-in DIP switch
          Performance
          Data Transfer Rate 1 Gbps
          Physical Dimensions 0.8"h x 1.7"w x 4.1"d
          Ports/Connectors (1) Ethernet 1000Base-X SC single mode female x 2
          (1) Ethernet 10Base-T/100Base-TX/1000Base-T RJ-45 female
          Power Notes External power adapter
          Voltage Required: AC 120/230 V (50 - 60 Hz)
          Protocols
          Networking Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
          Returns Policy This product is subject to our return policy. Please see our complete return policy for details.
          Standards
          Compliant Standards FCC Class A certified, Plug and Play, TIA/EIA-568-B, UL
          UNSPSC 26121609
          Warranty - Labor Lifetime
          Warranty - Parts Lifetime
          Collapse & Return to Top
          Add this product to your cart with selected accessories
          Add To Cart
          Power Cords (1 Product)
          Power Supplies (1 Product)
          Add this product to your cart with selected accessories
          Add To Cart
          Collapse & Return to Top

          Our Accessibility Policy


          We endeavor to make our website accessible to any and all users. Please contact us toll-free at 800-998-4388 if you need assistance with navigating our blog, website, or placing an order. We appreciate your business and are happy to answer any questions that you may have.
          04