Connection Clearance Center. Shop Now!
Connected: Bridge The Digital Divide

Subscribe to Our Emails


          Eaton BladeUPS 8kW 208V L21-30P Input L21-30R Output Power Xpert Gateway 2000

          More From: Eaton
          Item #: 17413881
          Mfr. Part#: ZC0811108100000
          Availability: Temporarily Out-of-Stock
          Est. Ship: Call for next available delivery

          • Provides 8kW power
          • 5 minute(s) Battery Runtime at Full Load

          Ordering Information

          The Powerware BladeUPS is a power quality solution, expanding power protection from 12 to 60kW in a single industry standard 19-inch rack, and providing this robust, compact solution without generating the additional heat associated with legacy end-of-row, modular UPS products. It can be deployed in a number of configurations from a distributed architecture (one in every rack), to end of row (up to six units in a rack), to a central system (not on the IT floor, but in the electrical closet). In addition, the exceptionally high efficiency rating is not a large energy cost burden when installed inline with the output of a large, central UPS or in highly critical computing areas where dual UPS redundancy (2N) is required.
          Collapse & Return to Top
          Actual Weight 311.00 lb(s)
          Compatibility Notes Communications and User Interface

          Software Compatibility: UPS ships with Software Suite CD containing LanSafe
          power management software and trial version of PowerVision
          X-Slot Bays: (2) available for ConnectUPS-X Web/SNMP Card, Modbus Card, Serial Card
          Additional X-Slot Communication Cards: Relay card for IBM AS/400 applications,
          Industrial Relay card for N/O-N/C applications (dry contacts), Hot Sync CAN bridge

          Control panel

          LCD: 2 lines by 20 characters
          (4) menu-driven interface buttons
          (4) status at a glance LEDs
          Multi Language English/Spanish standard; 6 other languages available
          Configuration Changes User capable, firmware auto configures
          Dry Contact Inputs One, user configurable
          Dry Contact Outputs One, user configurable


          Installation: user capable, located in the IT racks
          Preventative Maintenance: user capable, optional factory service available
          Corrective Maintenance: user capable, optional factory service available
          Serviceability Features: Hot-swappable batteries, Hot-swappable electronics,
          Automated internal maintenance bypass, Auto configure firmware, Flash firmware upgradeable
          Contents UPS, software, documentation
          Color Black
          Form Factor Rack-mountable
          Physical Dimensions 10.5"h x 17.3" x 28"d
          Battery Run Time (max) 5 minute(s)
          Power Provided 8 kW
          Power Notes General Characteristics

          Power Rating: 8kW per UPS module
          Efficiency: >97%

          Input Characteristics

          Input Voltage: 208VAC
          Voltage Range: 180 to 265V
          Frequency Range: 50 or 60Hz, ±5Hz
          Input Current Distortion: <5% with IT loads (PFC power supplies)
          Input Power Factor: >.97 with IT loads (PFC power supplies)
          Inrush Current: Load dependent
          Input Requirements: 3-phase, 4 wire + ground
          Bypass Source: same as input, (single feed)
          Generator Compatibility: fast sync slew rate for generator synchronization

          Output Characteristics

          Rated Output Voltage: 180 to 255VAC, Ph to Ph
          Output Configuration 3-phase, 4 wire + ground
          Output Frequency (nominal): 50 or 60Hz auto-detection on startup
          Frequency Regulation: 0.1Hz free running
          Load Power Factor Range Lagging: 0.7; Leading: 0.9
          Total Output Voltage Distortion: <3% (linear load); <5% (non-linear load)

          Battery Characteristics

          Battery Type: VRLA - AGM
          Battery Runtime (Internal): 12 minutes at 50% load; 4.7 minutes at 100% load
          Battery String Voltage: 240VDC
          Battery Test: automatic battery test standard (remote scheduling capable); manual battery test from front display
          Battery Recharge Profile: automatic battery test standard (remote scheduling capable); manual battery test from front display
          Battery Cut-off Voltage: variable from 1.67 VPC at <5 min. runtime to 1.75 VPC at >90 min. runtime
          Battery Low Condition: announced with alarm at 2 minutes
          Extended Battery Capability: yes, add up to (4) additional 3U battery enclosures (~30 min at 100% load, >1 hour at 50% load)
          Returns Policy This product is subject to our return policy. Please see our complete return policy for details.
          UNSPSC 39121011
          Warranty - Labor 1 Year
          Warranty - Parts 1 Year
          Collapse & Return to Top
          Description Availability Unit Price  
          View All Warranties
          Collapse & Return to Top

          Our Accessibility Policy

          We endeavor to make our website accessible to any and all users. Please contact us toll-free at 800-998-4388 if you need assistance with navigating our blog, website, or placing an order. We appreciate your business and are happy to answer any questions that you may have.