Huge Savings on Top Tech Products


          APC Smart-UPS SRT 5000VA 4500W 230V Int'l 3U RM HW Input (10) Outlets Extended Runtime

          More From: APC
          Item #: 18399398
          Mfr. Part#: SRT5KRMXLI
          Availability: Temporarily Out-of-Stock
          Est. Ship: Call for next available delivery

          • Provides 5000VA, 4500watt(s), 230V power
          • Surge Suppression is Standard
          • Connector(s): Power IEC 320 EN 60320 C13 (F), Power IEC 320 EN 60320 C19 (F), Power IEC jumper
          • 10 Outlets
          • 4.00 minute(s) Battery Runtime at Full Load
          • Attributes include Double conversion online

          Ordering Information

          The APC by Schneider Electric Smart-UPS On-Line SRT is a high performance uninterruptible power supply (UPS). The UPS helps to provide protection for electronic equipment from utility power blackouts, brownouts, sags, surges, small utility power fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until utility power returns to safe levels or the batteries are completely discharged.

          The UPS will recognize as many as 10 external battery packs connected to the UPS. However there is no limit to the number of XLBPs that can be used with the UPS. External battery packs and XLBPs are available separately.

          Note: For each XLBP added, increased recharge time will be required.
          Collapse & Return to Top
          Actual Weight 120.00 lb(s)
          Compatibility Notes SRT5KRMXLI Features

          LCD graphics display - Text and mimic diagrams that display modes of operation, system parameters and alarms.
          10/100 BaseT Connection - Connect the device to a network using a 10 or 100 BaseT connection.
          Green mode - Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
          Battery failure notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

          Smart-UPS On-Line Features & Benefits


          Automatic internal bypass - Supplies utility power to the connected loads in the event of a UPS power overload or fault.
          Scalable runtime - Allows additional run time to be quickly added as needed.
          Intelligent battery management - Maximizes battery performance, life, and reliability through intelligent, precision charging.
          Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
          Automatic restart of loads after UPS shutdown - Automatically starts up the connected equipment upon the return of utility power.
          Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.


          Network manageable - Provides remote power management of the UPS over the network.
          InfraStruXure Manager Compatible - Enables centralized management via the APC InfraStruXure Manager.
          SmartSlot - Customize UPS capabilities with management cards.
          LED status indicators - Quickly understand unit and power status with visual indicators.
          Serial connectivity - Provides management of the UPS via a serial port.


          Plug-and-Play external batteries - Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
          Rack/Tower convertible - Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
          Flash upgradeable firmware - Install maintenance releases of firmware remotely using FTP.


          User-replaceable batteries - Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).
          Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
          Predicitive failure notification - Provides early-warning fault analysis ensuring proactive component replacement.
          Disconnected battery notification - Warns when a battery is not available to provide backup power.
          Audible alarms - Provides notification of changing utility power and UPS power conditions


          Frequency and voltage regulation - Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
          Power conditioning - Protects connected loads from surges, spikes, lightning and other power disturbances.
          Input power factor correction - Minimizes installation costs by enabling the use of smaller generators and cabling.
          Generator compatible - Ensures clean, uninterrupted power to protected equipment when generator power is used.
          Cold-start capable - Provides temporary battery power when the utility power is out.
          Resettable circuit breaker - Easy recovery from overloads; no need to replace a fuse.
          Safety-agency approved - Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
          # Ports 10
          Communication Interface Contact closure, Serial (RS-232), USB
          Connector Power IEC 320 EN 60320 C13 (F), Power IEC 320 EN 60320 C19 (F), Power IEC jumper
          Contents UPS, rack mounting brackets, rack mounting hardware, rack mounting support rails, temperature probe, documentation
          Attributes Double conversion online
          Color Black
          Form Factor 3U Rackmount
          Physical Dimensions 5.1"h x 17"w x 28.3"d
          Ports/Connectors Connections

          Output Connections: (6) IEC 320 C13, (4) IEC 320 C19, (2) IEC Jumpers
          Input Connection: Hard Wire 3 wire (1PH+N+G)

          Communications & Management

          Interface Ports: Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB
          Available SmartSlot Interface Quantity: (1)
          Control panel: Multi-function LCD status and control console
          Audible Alarm: Audible and visible alarms prioritized by severity
          Emergency Power Off (EPO): Yes
          Battery Run Time (max) 4.00 minute(s)
          Power Provided 230 V, 4500 watt(s), 5000 VA
          Surge Suppression Standard
          Power Notes Output

          Output Power Capacity: 4500 Watts / 5000 VA
          Max Configurable Power: 4500 Watts / 5000 VA
          Nominal Output Voltage: 230V
          Output Voltage Distortion: Less than 3%
          Output Frequency (sync to mains): 50/60Hz +/- 3Hz
          Other Output Voltages: 220V, 240VAC
          Crest Factor: 3:1
          Topology: Double Conversion Online
          Waveform Type: Sine wave
          Bypass: Internal Bypass (Automatic and Manual)


          Nominal Input Voltage: 230VAC
          Input Frequency: 45-65Hz (auto sensing)
          Input voltage range for main operations: 160-275V
          Other Input Voltages: 220V, 240VAC


          Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte; leakproof.
          Typical recharge time: 3 hours
          Replacement Battery: APCRBC140
          RBC Quantity: (1)

          Surge Protection and Filtering

          Surge energy rating: 480 Joules
          Returns Policy This product is subject to our return policy. Please see our complete return policy for details.
          UNSPSC 39121011
          Warranty - Labor 3 Years
          Warranty - Parts 3 Years
          Warranty Details 3 years repair or replace (excluding battery), 2 years for battery.
          Collapse & Return to Top

          Our Accessibility Policy

          We endeavor to make our website accessible to any and all users. Please contact us toll-free at 800-998-4388 if you need assistance with navigating our blog, website, or placing an order. We appreciate your business and are happy to answer any questions that you may have.